[SOLVED] Internal flash full - no memory left

Support for your TonidoPlug
guido
Super Tonidoid
Super Tonidoid
Posts: 43
Joined: Fri Nov 06, 2009 1:25 pm

[SOLVED] Internal flash full - no memory left

Postby guido » Sat Dec 05, 2009 8:14 am

Hi,
Since the last update and I don't know what other actions the internal flash is fully used.
Via bitcomet I receive the message: driver z drive (my disk) is full.
How can I extend my internal flash or what shall I do to clean it from useless stuff (please explain in understandable steps for tonido dummies).

User avatar
madhan
Admin Tonidoid
Admin Tonidoid
Posts: 8617
Joined: Tue Dec 30, 2008 12:13 am
Location: Austin, TX, USA
Contact:

Re: Internal flash full - no memory left

Postby madhan » Sat Dec 05, 2009 9:30 am

Are you running bitcomet from Windows and downloading to a harddrive attached to your plug? Then it means your hard drive is full, not your internal flash.

guido
Super Tonidoid
Super Tonidoid
Posts: 43
Joined: Fri Nov 06, 2009 1:25 pm

Re: Internal flash full - no memory left

Postby guido » Sat Dec 05, 2009 10:17 am

yes and no,
there's really no internal flash menory over any more (0mb!) message appears in plug administration.
i'm going offline now but would appreciate any tip how to get back internal flash space.

devbloke
Tonido Team
Tonido Team
Posts: 1157
Joined: Tue Jan 27, 2009 10:38 pm

Re: Internal flash full - no memory left

Postby devbloke » Sat Dec 05, 2009 10:33 am


guido
Super Tonidoid
Super Tonidoid
Posts: 43
Joined: Fri Nov 06, 2009 1:25 pm

Re: Internal flash full - no memory left

Postby guido » Sun Dec 06, 2009 4:20 am

Mmh, tx.
Guess after that I'm not a newby anymore. :roll:
I'll try the putty thing this afternoon and will give feedback if I got some of the 461 M used internal flash back finally.

guido
Super Tonidoid
Super Tonidoid
Posts: 43
Joined: Fri Nov 06, 2009 1:25 pm

Re: Internal flash full - no memory left

Postby guido » Sun Dec 06, 2009 9:52 am

that's what i did expect:
the usual dos troubles -this is really zo 80's....
i opened putty
i typed root en hit enter
then i can't fill in a password or anything
but maybe it went al wrong with the start screen because i can't see the same filled submenu as in the manual..
Saved sessions:
HomeCxn-Template......

Tuxedo
Tonido Team
Tonido Team
Posts: 1458
Joined: Wed Jan 28, 2009 11:30 pm

Re: Internal flash full - no memory left

Postby Tuxedo » Sun Dec 06, 2009 11:41 am

@Guido: You don't need the filled submenu in putty. What you are doing is correct.
After entering root and pressing enter, it will prompt for root user's password. When you type password here, it will not be displayed for security purposes. Please type the password completely (this is the same password you use in PlugAdmin UI) and press enter, it should log you in.

guido
Super Tonidoid
Super Tonidoid
Posts: 43
Joined: Fri Nov 06, 2009 1:25 pm

Re: Internal flash full - no memory left

Postby guido » Sun Dec 06, 2009 11:53 am

ok, got the whole correct screen but how can i reach the directory on the plug?

Tuxedo
Tonido Team
Tonido Team
Posts: 1458
Joined: Wed Jan 28, 2009 11:30 pm

Re: Internal flash full - no memory left

Postby Tuxedo » Sun Dec 06, 2009 11:56 am


guido
Super Tonidoid
Super Tonidoid
Posts: 43
Joined: Fri Nov 06, 2009 1:25 pm

Re: Internal flash full - no memory left

Postby guido » Sun Dec 06, 2009 12:01 pm

when i type this:

Code:
# cd /media/usb0


i get:
No such file or directory

should i connect the usb drive?


Return to “TonidoPlug Support”

Who is online

Users browsing this forum: No registered users and 9 guests