Search found 28 matches

by scott_mebust
Wed Sep 09, 2009 7:09 pm
Forum: TonidoPlug Support
Topic: Installing on second ethernet port
Replies: 2
Views: 1975

Re: Installing on second ethernet port

If you use a cross-over Ethernet cable, you can connect it directly to your second port but that would allow only the MacPro and the Tonido to communicate unless you also configured your MacPro for IP forwarding and Network Address Translation (NAT).
by scott_mebust
Tue Sep 08, 2009 9:17 pm
Forum: TonidoPlug Support
Topic: Sheeva Plugpower consumption
Replies: 8
Views: 3779

Re: Sheeva Plugpower consumption

I only measured the power being drawn by the whole device (Tonido plus USB flash drive). The "Watts Up!" power meter is in-line with the Tonido. The Tonido is plugged into the power meter and the power meter is plugged into the electrical outlet.
by scott_mebust
Sat Sep 05, 2009 10:36 am
Forum: TonidoPlug Support
Topic: Podcatcher for downloading and management of podcasts
Replies: 1
Views: 1534

Podcatcher for downloading and management of podcasts

I was hoping that hpodder was available in Ubuntu Jaunty (or, at least, in the armel port) but it seems that it is not. It is text-based, can be scheduled via cron, and has few dependencies. I was going to set it up to periodically download podcasts to the Tonido to be served up by the UPnP and/or i...
by scott_mebust
Thu Sep 03, 2009 7:21 pm
Forum: TonidoPlug Support
Topic: Can't add/upgrade packages
Replies: 6
Views: 19632

Re: Can't add/upgrade packages

By the way, I found that after having done it once, I had to do this a second time. Seems the subdirectories somehow got removed.
by scott_mebust
Thu Sep 03, 2009 10:39 am
Forum: TonidoPlug Support
Topic: Tonido versus Sheeva
Replies: 0
Views: 2249

Tonido versus Sheeva

I just wanted to say I appreciate the efforts (and success) of Tonido in adding value to the (Sheeva) Plug computer by providing a Web UI for a personal (cloud) server. Apart from my Qnap NAS, which provides a web administration interface, I'm used to working at a lower level with the Linux distribu...
by scott_mebust
Thu Sep 03, 2009 9:00 am
Forum: TonidoPlug Support
Topic: Updating Tonido Software versus updating Operating System
Replies: 1
Views: 1668

Updating Tonido Software versus updating Operating System

So, I'm guessing that the indicator, within the Tonido Web UI, that says the Tonido software is up to date and that allows one to update it if necessary does not reflect or affect whether the Ubuntu Linux operating system is up to date. Is this the case? That is, updating the Tonido through the Web ...
by scott_mebust
Wed Sep 02, 2009 9:47 pm
Forum: TonidoPlug Support
Topic: iTunes server on Tonido Plug
Replies: 16
Views: 14189

Re: iTunes server on Tonido Plug

Hah. That's like assuming I kept notes, which I didn't. Basically, just install mt-daapd like: root@ginger:/# apt-get install mt-daapd root@ginger:/# cd /etc root@ginger:/etc# cp mt-daapd.conf mt-daapd.conf.orig Then edit /etc/mt-daapd.conf. I made the following changes: root@ginger:/etc# diff mt-da...
by scott_mebust
Wed Sep 02, 2009 8:54 pm
Forum: TonidoPlug Support
Topic: iTunes server on Tonido Plug
Replies: 16
Views: 14189

Re: iTunes server on Tonido Plug

Well, now it's working. I have a feeling that the only problem was, perhaps, a corrupt database that just needed to be deleted. :D
by scott_mebust
Wed Sep 02, 2009 8:24 pm
Forum: TonidoPlug Support
Topic: Changing the kjournald / ext3 commit interval
Replies: 3
Views: 3945

Re: Changing the kjournald / ext3 commit interval

I considered doing a remount with the commit option but I'd have to do that every time I rebooted, removed the drive, etc. Actually, I just ended up converting it back to an ext2 partition by doing this: tune2fs -O ^has_journal /dev/sdc1 fsck.ext2 /dev/sdc1 with the USB drive on another system (as /...
by scott_mebust
Wed Sep 02, 2009 8:02 pm
Forum: TonidoPlug Support
Topic: iTunes server on Tonido Plug
Replies: 16
Views: 14189

Re: iTunes server on Tonido Plug

I'm not sure if that was the problem either. Firefly (mt-daapd) was configured to use sqlite3 and I thought it only needed the shared library (already installed) and nothing more. Regardless, i installed the sqlite3 command line interface. Then, I checked the location of the sqlite database and the ...

Go to advanced search