Mount Point

kaan · **Joined:** Tue Nov 29, 2011 5:27 pm **Posts:** 3

Hi,

Is there a way to change the default mount point: H ?
At work, this drive letter is used and a log in script overwrites the H drive to a work location every time I restart my PC.

Thanks,

Kaan

rydgaze · **Joined:** Wed Jan 28, 2009 11:26 pm **Posts:** 885

The mount point is selected based on available mount points.. let me see if we can provide a simple way to override it .. may be an XML key in config file in the next build.

kaan · **Joined:** Tue Nov 29, 2011 5:27 pm **Posts:** 3

That would be great. Obviously, the million dollar question is : when do you think we can have a new version

I can't wait to use the Tonido Drive at work as all other WebDav solutions were too slow and I am hoping that TonidoDrive will be faster.

Thanks,

Kaan

CiBiaR · **Posted:** Tue Nov 29, 2011 5:57 pm

Hello,

That wolud be great for me, too. Al my computers use the last letters for network drives (z, y, x...) to minimize conflicts with physical drive letters, specially on computers with built-in multi-card readers (added to two hard drives and two optical drives in some cases).

Hope the next release will allow us to change default mount point.

Regards.

rydgaze · **Joined:** Wed Jan 28, 2009 11:26 pm **Posts:** 885

ok.. let me get this added in the next release!

rydgaze · **Joined:** Wed Jan 28, 2009 11:26 pm **Posts:** 885

If I can get you guys a early version with the fix, would you be able to try it out?
Thanks

CiBiaR · **Posted:** Wed Nov 30, 2011 3:59 pm

Yes, sure.

I can install it on a Windows 7 and a Windows XP Pro computers with 2 or more physical drives installed and at least 5 network drives configured.

Just let me know when the test release is ready to download.

Regards.

rydgaze · **Joined:** Wed Jan 28, 2009 11:26 pm **Posts:** 885

The new code is at http://www.tonido.com/downloads/TonidoDrive.exe

Code:

After adding, it will something like

Code:

<?xml version="1.0" encoding="utf-8"?>
<tonidodriveconfig>
  <config>
    <loglevel>information</loglevel>
    <maxdownloadsizeinmb>10</maxdownloadsizeinmb>     
    <mountpointoverride>Q:</mountpointoverride>
  </config>
</tonidodriveconfig>

Save the file and then start TonidoDrive.exe, it should now mount on the point provided in the config file.

This has the following changes:
1. The mounted folder will no longer automatically open on computer start up.
2. Ability to override mount point.

Let me know if you have any problem.

CiBiaR · **Posted:** Wed Nov 30, 2011 5:00 pm

Thanks for the quick download link.

Does this release include the fix for the Memory write error on shutdown as explained in this post http://www.tonido.com/forum/viewtopic.php?f=56&t=4191? Just to be sure I can carry on the test, as I was experiencing the same error on my Windows test computers.

rydgaze · **Joined:** Wed Jan 28, 2009 11:26 pm **Posts:** 885

CiBiaR wrote:

Thanks for the quick download link.

Does this release include the fix for the Memory write error on shutdown as explained in this post http://www.tonido.com/forum/viewtopic.php?f=56&t=4191? Just to be sure I can carry on the test, as I was experiencing the same error on my Windows test computers.

Nope. that fix is not yet present, It worked ok in XP VM but it still is showing same error in Win vista. so it is still not released.

Mount Point

Who is online