After the last system update, TP2 keeps cycling power

1. System come up, blue light keeps blinking
2. System shuts down and power on again
3. go to #1.

The only way to come out of this vicious cycle is to unplug the USB drive, and then... following is the sequence...

1. System come up, blue light keeps blinking
2. before System shuts down unplug usb drive
3. now after a while blinking led's change color to orange for a while
4. then purple for a while...
5. Now plug the usb drive back in.
6. Now after a while the led stabilize - blue.

This never happened before. Please help. There are other issues as well, which are being reported as separate issues. this will break the use case of being able to update the TP2 remotely followed by a reset, which is when a physical intervention is required. This needs to be resolved.


-raj

There is no change in the recent update regarding how USB disks are handled.
If the USB is formatted as EXT3, try to do a fsck on it. Also are you booting from the USB disk.

Please upload tonido and system logs here. Blinking blue means the plug is trying to access/mount the disk and its not able to complete it.
We need logs for debugging the problem. Please upload the file /root/tonido_usbmount.log.

Should I upload the logs after successfully connecting back the usb drive? if so please find the logs attached...

Hello, guys it has been more than 6 months and no resolution to this... Please help close it...

-raj